How to make
a Concrete Seat
HOW TO MAKE A CONCRETE SEAT
Page 1. Introduction
Page 2. The Plans and Material Requirements
Page 3. Making the Framework
Page 4. The Reinforcing
Page 5. Making and pouring the Concrete
Page 6. The Footing
Page 7. The Finishing Touches -
Step 13: Unblock, grind and clean up
Come back a couple of weeks later.
It's now time for the good part. The work has mostly been done and you can try out the seat.
Remove the blocks from underneath the seat and run a grinder along the sharp edges of the concrete.
That's pretty much it. Clean up around the area and enjoy.
One thing's for sure (actually, three things). No one's going to steal it, it's not going to blow away and it will be around for a long time.
<< Previous page
Send us your
about this project via the
User Photo/Comments about this article
No user photo/comments about this article so far. Be the first.
See other people's photos/comments of various TravellingBuilder projects
Copyright TravellingBuilder.Com. All rights reserved. Reproduction of any material
in this website is strictly prohibited without expressed written permission from the owner.